This hat uses a simple square shape to create a streamlined design that will make a welcome gift for anyone in your life. In this hat, a traditional square motif is used, which is then converted to a hexagon to shape the top crown of the hat. The unisex design is sized by adjusting the gauge of the motifs.
What you will need:
- 142 (156, 172, 189)yds or 130 (142.6, 157.3, 172.8)m #3 dk weight yarn
- D/3 (3mm), G/6 (4mm), H/8 (5mm), J/10 (6.0mm) crochet hook, or size needed to obtain gauge.
- Yarn needle
- Scissors
Gauge:
Each motif is 2.5 (3, 3.5, 4) in or 6.35 (7.62, 8.9, 10.2)cm square after blocking to make hat sizes 15 (18, 21, 24) in or 38.1 (45.7, 53.3, 61)cm circumference.
Note: Size of hat is based on gauge size of individual motifs. Make sure your motif is the correct size after blocking.
Finished Sizes:
15 (18, 21, 24) in or 38.1 (45.7, 53.3, 61)cm circumference.
7.25 (8.5, 9.75, 11) in or 18.4 (21.6, 24.8, 27.9)cm tall.
Shown in size 21 in (53.3cm) circumference.
Stitch Guide:
See glossary for chain (ch), double crochet (dc), single crochet (sc), single crochet through back loop only (sc-blo), half double crochet through back loop only (hdc-blo), and slip stitch (slst).
Watch tutorial videos here:
Instructions:
Motif 1:
Round 1: Ch20, slst in 5th ch from hook to form ring, slst in ea of next 3 chs, (counts as dc), 2dc in same ring, (ch3, 3dc)x3 in same ring, ch1, slst to 2nd ch of beg ch (counts as ch3).
Round 2: Slst in ea of next 3 chs (counts as dc), 2dc in same ch2 sp, [ch1, (3dc, ch3, 3dc) in next ch3 sp]x3, ch1, 3dc in next ch3 sp, ch1, slst to 2nd ch of beg ch (counts as ch3).
Round 3: Slst in ea of next 3 chs (counts as dc), 2dc in same ch2 sp, ch1, 3dc in next ch1 sp, ch1, (3dc, ch3, 3dc) in next ch3 sp, ch1, 3dc in next ch1 sp, ch1, 3dc in next ch3 sp. Leave rem motif unworked at this point. Do not fasten off.
Motifs 2 – 5:
Rounds 1 – 2: Rep rounds 1 – 2 of motif 1.
Round 3: Slst in ea of next 3 chs (counts as dc), 2dc in same ch2 sp, slst in ch1 sp on adjacent motif, 3dc in next ch1 sp, slst in next ch1 sp on adjacent motif (3dc, ch1, slst in ch3 sp on adjacent motif ch1, 3dc) in next ch3 sp, ch1, 3dc in next ch1 sp, ch1, (3dc, ch3, 3dc) in next ch3 sp, ch1, 3dc in next ch1 sp, ch1, 3dc in next ch3 sp. Leave rem motif unworked at this point. Do not fasten off.
Motif 6:
Work same as motifs 2 – 5.
Working across incomplete motifs 5 – 1, (ch1, slst in 2nd ch of ch2 sp, ch1, 3dc in next ch3 sp on next motif, ch1, 3dc in next ch2 sp, ch1, 3dc in next ch3 sp)x5. Leave rem motif unworked at this point. Do not fasten off.
Motif 7:
Rounds 1 – 2: Rep rounds 1 – 2 of motif 1.
Round 3: Slst in ea of next
3 chs (counts as dc), 2dc in same ch2 sp, slst in ch1 sp on adjacent motif, 3dc in next ch1 sp, slst in next ch1 sp on adjacent motif, (3dc, ch1, slst in ch3 sp on adjacent motif, ch1, 3dc) in next ch3 sp, ch1, 3dc in next ch1 sp, ch1, 3dc in next ch3 sp. Leave rem motif unworked at this point. Do not fasten off.
Motifs 8 – 11:
Rounds 1 – 2: Rep rounds 1 – 2 of motif 1.
Round 3: Slst in ea of next 3 chs (counts as dc), 2dc in same ch2 sp, slst in ch1 sp on adjacent motif, 3dc in next ch1 sp, slst in next ch1 sp on adjacent motif (3dc, ch1, slst in ch3 sp on adjacent motif, ch1, 3dc) in same ch3 sp, ch1, 3dc in next ch1 sp, ch1, 3dc in next ch3 sp. Leave rem motif unworked at this point. Do not fasten off.
Motif 12:
Work same as motifs 8 – 11. Working across incomplete motifs 11 – 7, [ch1, slst in 2nd ch of ch3 sp, ch1, 3dc in next ch3 sp on next motif, ch1, 3dc in next ch1 sp, ch1, 3dc in next ch3 sp)x5. Leave rem motif unworked at this point. Do not fasten off.
Motif 13:
Round 1: Ch20, slst in 5th ch from hook to form ring, slst in ea of next 3 chs (counts as dc), 2dc in ring, (ch3, 3dc)x5 in ring, ch1, slst to 2nd ch of beg ch (counts as ch3).
Round 2: Slst in ea of next 3 chs, (counts as dc), 2dc in same ch3 sp, [ch1, (3dc, ch3, 3dc) in next ch3 sp)x5, ch1, 3dc in next ch3 sp, ch1, slst to 2nd ch of beg ch (counts as ch3). Leave rem motif unworked at this point. Do not fasten off.
Note: On round 3, Motif 13 (hexagon shaped with 6 sides labeled a – f on chart) will join to the top edge of motifs 7 – 12 as follows: 7/a, 8/b, 9/c, 10/d, 11/e, 12/f. At the end of motif 13, continue along the incomplete edge of motifs 7 and 1, while at the same time joining them to the side edge of motifs 12 and 6 respectively.
Round 3: Slst in ea of next 3 chs (counts as dc), 2dc in same ch2 sp, slst in ch1 sp on adjacent motif 7, 3dc in next ch1 sp, slst in next ch1 sp on motif 7, (3dc, ch1, slst in ch3 sp on adjacent motif 8, ch1, 3dc) in next ch3 sp, slst in ch1 sp on motif 8, 3dc in next ch1 sp, slst in next ch1 sp on motif 8, (3dc, ch1, slst in ch3 sp on adjacent motif, ch1, 3dc) in next ch3 sp, slst in ch1 sp on motif 9, 3dc in next ch1 sp, slst in next ch1 sp on motif 9, (3dc, ch1, slst in ch3 sp on adjacent motif 9, ch1, 3dc) in next ch3 sp, slst in ch1 sp on motif 10, 3dc in next ch1 sp, slst in next ch1 sp on motif 10, (3dc, ch1, slst in ch3 sp on adjacent motif 10, ch1, 3dc) in next ch3 sp, slst in ch1 sp on motif 11, 3dc in next ch1 sp, slst in next ch1 sp on motif 11, (3dc, ch1, slst in ch3 sp on adjacent motif 11, ch1, 3dc) in next ch3 sp, slst in ch1 sp on motif 12, 3dc in next ch1 sp, slst in next ch1 sp on motif 12, 3dc in next ch3 sp.
Working across incomplete side edge of motif 7 (while joining to motif 12) and motif 1 (while joining to motif 6), ch1, slst in 2nd ch of ch2 sp on motif 7 and ch3 sp on motif 12, ch1, 3dc in next ch3 sp on motif 7, slst in next ch1 sp on motif 12, 3dc in next ch1 sp on motif 7, slst in next ch3 sp on motif 7, ch1, slst in 2nd ch of ch2
between motifs 7 and 1 and in junction between motifs 12 and 6, ch1, 3dc in next ch3 sp on motif 1, slst in next ch1 sp on motif 6, 3dc in next ch1 sp on motif 1, slst in next ch1 sp on motif 6, 3dc in next ch3 sp on motif 1, ch1, slst in 2nd ch of ch3 sp on motifs 6 and 1, ch1, slst to top of ch3 of motif 6 and at the same time joining to first ch at beg of motif 1 to join. Do not fasten off.
Hat Band:
Row 1: Ch7, sc in 2nd ch from hook and in ea ch across, slst in next ch sp on edge of hat. — 6 scs
Row 2: Hdc-blo in ea st across, turn. — 6 hdcs
Row 3: Ch1, sc-blo in ea st across, skip next st on edge of hat, slst in next st or ch sp on edge of hat, turn. — 6 scs-blo
Rep rows 2 – 3 until you work completely around the hat.
Working through both thicknesses, slst in free loop of ea starting ch and blo of ea st on last row across to seam band. Fasten off.
Finishing:
Weave in loose ends. Hand wash, block to finished measurements and allow to dry.
Learn & Explore More
- Tapestry Crochet Learning Page
- Crochet Lace Learning Page
- Tunisian Crochet Learning Page
- Textured Crochet Learning Page
Join the KO Community
Get weekly free patterns, behind-the-scenes tutorials, and exclusive textured crochet videos in my newsletteror on Patreon.
You Might Also Like
Love this pattern?
Get all 24 hat designs (plus printable charts) in my 24 Crochet Hats eBook — available now in the KO Shop.
Or subscribe to my newsletter for weekly free patterns, video tutorials, and creative inspiration.
Kristin Omdahl patterns, books, handouts and videos are for your personal use only; additional, up to 10 items can be made to sell from one design. Commercially produced products made from my instructions are prohibited. All Kristin Omdahl patterns, books, handouts and videos are licensed for single use and remain the intellectual property of Kristin Omdahl. This pattern may not be reproduced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise.
©Copyright 2025 All Rights Reserved
About Kristin Omdahl
When she’s not writing, Kristin shares crochet and knitting designs, recipes, and behind-the-scenes glimpses of her creative process with her global community on Patreon.
Discover More by Yarn Weight
Explore all pattern categories by yarn weight:


